How to Make Glow in the Dark Slime

How to Make Glow in the Dark Slime It only takes one more ingredient to turn normal slime into glowing slime. This is a great Halloween project, though its fun for any time of the year. Glowing slime is safe for kids to make. Difficulty: Easy Time Required: about 15 minutes Materials for Glow in the Dark Slime Elmers glue gel or 4%  polyvinyl alcohol  solution4% (saturated) borax solutionPhosphorescent zinc sulfide (ZnS) or glowing paintMeasuring cups/spoonsBowl or zip-top plastic baggieSpoon (optional) Make Glowing Slime Basically, you make glowing slime by adding zinc sulfide or glowing paint to normal slime. These instructions make a clear slime that glows in the dark. However, you could add zinc sulfide to any of the recipes for slime with different characteristics.The slime is made by preparing two separate solutions, which are then mixed. You can double, triple, etc. the recipe if you want more slime. The ratio is 3 parts PVA or glue solution to 1 part borax solution, with a little glow-in-the-dark agent thrown in (measurement isnt critical).First, lets prepare the glue gel or polyvinyl alcohol (PVA) solution. If you have polyvinyl alcohol, you want to make a 4% polyvinyl alcohol solution. 4 grams of PVA in 100 ml of water is great, but the project still works if your solution is a different percent of PVA (just takes more or less). Most people do not have PVA sitting around their homes. You can make a glue gel solution by mixing 1 part of glue gel (either clear or pale blue) with 3 parts of war m water. For example, you could mix 1 tablespoon glue with 3 tablespoons warm water, or 1/3 cup glue with 1 cup of warm water. Stir the glow agent into the glue gel or PVA solution. You want 1/8 teaspoon of zinc sulfide powder per 30 ml (2 tablespoons) of solution. If you cannot find zinc sulfide powder, you can stir in some glow-in-the-dark paint. You can find glowing paint at some paint stores or glowing paint powder (which is zinc sulfide) at craft or hobby stores. The zinc sulfide or paint powder will not dissolve. You just want it mixed in really well. Please read the label on the paint to make sure it is safe enough for your purposes.The other solution you need is a saturated borax solution. If you are in a chemistry lab, you can make this by mixing 4 g of borax with 100 ml warm water. Again, most of us arent going to be doing the project in a lab. You can make a saturated borax solution by stirring borax into warm water until it stops dissolving, leaving borax at the bottom of the glass.Mix together 30 ml (2 tablespoons) of PVA or glue gel solution with 10 ml (2 teaspoons) of borax solution. You can u se a spoon and a cup or you can just squish it together with your hands or inside a sealed baggie. The phosphorescent glow is activated by shining a light on the slime. Then you turn out the lights and it will glow. Please dont eat the slime. The slime solution itself isnt exactly toxic, but it isnt good for you, either. Zinc sulfide can be irritating to the skin, so wash your hands after playing with this slime. It may be harmful if swallowed, not because ZnS is toxic, but because it can react to form hydrogen sulfide gas, which isnt great for you. In a nutshell: wash your hands after using the slime and do not eat it. Do not inhale or ingest the glow-in-the-dark ingredient, whichever you choose to use.Store your slime in a baggie or other sealed container to keep it from evaporating. You can refrigerate it if desired. The slime cleans up well with soap and water. Tips for Slime Success The glowing slime in the photo was made using  a glowing paint called Glow Away at Michaels craft store, for $1.99, that is good for many, many batches of glowing slime (or other glowing projects). Its safe, washes away with water, and is easy to mix into the slime gel. It was located with the tempera paints. Other products may work equally well, just be sure to check the label for safety information.Instead of zinc sulfide (the compound used to make plastic glow-in-the-dark stars), you can substitute any phosphorescent pigment. Be sure the product is marked phosphorescent (glows in the dark) and not fluorescent (glows only under black light).You can use Elmers non-toxic blue glue gel for this project, sold with school supplies, but there is a clear glue gel made by another manufacturer, plus there are red or blue glue gels with stars and glitter that you could use.Usually, borax is sold in stores right next to laundry detergent. If you dont see it there, try looking near household cleaning chemicals or on the insecticide aisle (note: boric acid isnt the same chemical, so its not a good idea to  make substitutions).